Kismet Wireless

Kismet Forums

 

Posted by:Ratchet
Subject:KISMET with D-Link DWA 125
Date:13:59:42 26/10/2010

> > My chipset is Ralink RT3070.
> >
> > I installed kismet, I set the
> > / Etc / kismet / kismet.conf changing the line
> > "Source = RT3070, ra0, tesste.
> > But he returns the following error.
> >
> > Launching kismet_server: //usr/bin/kismet_server
> > Suid priv-dropping disabled. This may not be secure.
> > No specific sources given to be enabled, all will be enabled.
> > Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng)
> > Enabling channel hopping.
> > Enabling channel splitting.
> > FATAL: Unknown capture source type 'RT3070' in source 'RT3070,ra0,tesste'
> > Done.
> >
> >
> > Any suggestions?
>
> You're using an extremely old version of kismet, which predates that card even existing.
>
> You need to install a modern version, 2010-07-R1. You also need to use the kernel 3070 drivers, not standalone ones. Your interface being named 'ra0' indicates you're most likely using non-kernel drivers, which almost certainly will not work properly with kismet.



OK, following the orders.
I downloaded kismet-2010-07-r1. untarred folder
now how to install? I tried a few command but had no success.

Thanks


Reply to this message