Kismet Wireless

Kismet Forums

 

Posted by:elterco
Subject:kismet and rl8187... help
Date:23:50:00 18/07/2009

hello, my english is bad, i speak in spanish


kismet -v para la version


Launching kismet_server: /usr/bin/kismet_server
Kismet 2008.05.R1
Done.

airmon-ng start mon0


Found 3 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

PID Name
2382 ifplugd
6856 wpa_supplicant
6858 ifplugd
Process with PID 6856 (wpa_supplicant) is running on interface wlan1
Process with PID 6858 (ifplugd) is running on interface wlan1


Interface Chipset Driver

wlan1 RTL8187 rtl8187 - [phy0]
mon0 RTL8187 rtl8187 - [phy0]
(monitor mode enabled on mon1)


lo que dice iwconfig

wlan1 IEEE 802.11bg Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

mon0 IEEE 802.11bg Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

mon1 IEEE 802.11bg Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0


[root@XXXX etc]# kismet -c rt8187,mon1,realtek
Launching kismet_server: /usr/bin/kismet_server
Will drop privs to sebastian (500) gid 500
No specific sources given to be enabled, all will be enabled.
Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng)
Enabling channel hopping.
Enabling channel splitting.
NOTICE: Disabling channel hopping, no enabled sources are able to change channel.
Source 0 (realtek): Enabling monitor mode for rt8187 source interface mon1 channel 6...
Source 0 (realtek): Opening rt8187 source interface mon1...
Spawned channel control process 14212
Dropped privs to sebastian (500) gid 500
Will attempt to put networkmanager to sleep...
Allowing clients to fetch WEP keys.
Logging networks to Kismet-Jul-18-2009-1.network
Logging networks in CSV format to Kismet-Jul-18-2009-1.csv
Logging networks in XML format to Kismet-Jul-18-2009-1.xml
Logging cryptographically weak packets to Kismet-Jul-18-2009-1.weak
Logging cisco product information to Kismet-Jul-18-2009-1.cisco
Logging gps coordinates to Kismet-Jul-18-2009-1.gps
Logging data to Kismet-Jul-18-2009-1.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Tracking probe responses and associating probe networks.
Reading AP manufacturer data and defaults from /etc/ap_manuf
Reading client manufacturer data and defaults from /etc/client_manuf
Using network-classifier based data encryption detection
Not tracking duplicate IVs
Putting networkmanager to sleep...
FATAL: Dump file error: Unable to open dump file Kismet-Jul-18-2009-1.dump (Permission denied)
Sending termination request to channel control child 14212...
WARNING: Sometimes cards don't always come out of monitor mode
cleanly. If your card is not fully working, you may need to
restart or reconfigure it for normal operation.
Waiting for channel control child 14212 to exit...
Trying to wake networkmanager back up...
Kismet exiting.
Done.

kismet.conf ->>>

# Kismet config file
# Most of the "static" configs have been moved to here -- the command line
# config was getting way too crowded and cryptic. We want functionality,
# not continually reading --help!

# Version of Kismet config
version=2007.09.R1

# Name of server (Purely for organizational purposes)
servername=Kismet

# User to setid to (should be your normal user)
suiduser=sebastian

# Do we try to put networkmanager to sleep? If you use NM, this is probably
# what you want to do, so that it will leave the interfaces alone while
# Kismet is using them. This requires DBus support!
networkmanagersleep=true

# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README under the
# CAPTURE SOURCES section.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
# source=rtl8187
source=rt8187,mon0,realtek

# Comma-separated list of sources to enable. This is only needed if you defined
# multiple sources and only want to enable some of them. By default, all defined
# sources are enabled.
# For example:
# enablesources=prismsource,ciscosource



i can't work , how i can configure


Reply to this message