Kismet Wireless

Kismet Forums

 

Posted by:Afterthat
Subject:Problem Kismet don't record useful data in dump with Atheros AR928X
Date:11:30:46 15/01/2009

I have this problem: when I launch Kismet and Lock it to a channel it no register any useful data in dump to use with Aircrack.

The column "Size" in Kismet show always 0B for all the networks.

The Linux is Slax USB whit 2.6.27.8 Kernel.

The WIFI card is 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) (taken from LSPCI command)

The ath9k module is correctly load (taken from LSMOD command)

kismet.conf for source this:

===================================================================
# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README under the
# CAPTURE SOURCES section.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
source=ath5k_ag,wlan0,Atheros
===================================================================

What can I do?

Thank you in advance.


Reply to this message