Kismet Wireless

Kismet Forums

 

Posted by:dragorn
Subject:Newcore Drone / Server Configuration
Date:09:16:04 06/08/2008

> Hi all,
> I have managed to get a stable wireless driver version and OS.
> I have two wireless scanners running and they work fine as standalone systems. Now I would like to configure them as drones and report back to a central server.
>
> The kismet_drone.conf is fairly straight forward, and I believe that it is configured correctly as I see it acquire my wifi card and validate that it is monitor mode. It creates a kismet drone TCP server on port 2502 and starts to gather packets. After that there are no other messages, including a message that would indicate a server connected to it.
>
> In my server configuration I set up a source with drone,tcp://ipadd:2502,wifi1 - I'm hoping this is correct, but I'm not sure.
>
> Anyway, there seems to be very little documentation on how to setup the drone / server configuration. Anyone who has this setup and can point me in the right direction would be great!

That's about all it should take.

Make sure you're not firewalling, and that the drone is bound to a real IP, not loopback.

-m


Reply to this message