Kismet Wireless

Kismet Forums

 

Posted by:crysman
Subject:kismet on rtap0 (using ipw2200 chipset)
Date:20:28:13 01/10/2007

> > > Hello,
> > >
> > > is there any way how tu run kismet on rtap0 device (using ipw2200 chipset) to listen on network? I could only run it with "kismet -c ipw2200,eth1,<anything>". Eth0 is a non-wifi network card.
> > >
> > > I would like to run it on rtap0 to be able to surf use my eth1 normally for surfing net etc, because while eth1 is in monitor mode, it's not possible.. (or when I dont need it for surfing, I may need eth1 for running packet injection via aireply..)
> >
> > Yes, docs, it's called 'livetap'.
> >
> > However you don't be doing 802.11 injection with an ipw2200 card as far as I know.
> >
> > -m
>
> Thanks, pal, I will try it.. like "kismet -c livetap,rtap0,<anything>"??
>
> You can do packet injection on ipw2200, but has many limitations :((
> (
> - Card has to be associated to any AP (on the channel you want to inject) while injecting (you can inject to a different ap).
> - Card has to be in managed mode (you can still sniff through rtap0).
> - Only data frames can be sent (no auth/assoc/disassoc/deauth, etc).
> )

I tried 3 combinations, but none has worked :(


kismet -c ipw2200,rtap0,livetap
Server options: -c ipw2200,rtap0,livetap
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (livetap): Enabling monitor mode for ipw2200 source interface rtap0 channel 6...
FATAL: channel get ioctl failed 95:Operation not supported

kismet -c livetap,rtap0,livetap
Server options: -c livetap,rtap0,livetap
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
FATAL: Unknown capture source type 'livetap' in source 'livetap,rtap0,livetap'

kismet -c ipw2200,livetap,livetap
Server options: -c ipw2200,livetap,livetap
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (livetap): Enabling monitor mode for ipw2200 source interface livetap channel 6...
FATAL: GetIFFlags: interface livetap: No such device


Reply to this message