Kismet Wireless

Kismet Forums

 

Posted by:sonzo
Subject:FATAL: 'get_mode' does not return integer parameters.
Date:18:40:24 09/05/2007

> Yes you have.. You don't read error messages, even when they do provide you with >the fix...
>
> > WARNING: ath0 appears to not accept the Madwifi-NG controls. Will attempt to configure it as a standard Madwifi-old interface. If you are using madwifi-ng, be sure to set the source interface to the wifiX control interface, NOT athX

Yeah; but i dont know what kind of Source type I've to add in the Capture Sources :( I have madwifi (I DONT USE madwifi-ng) so; what kind of Source type i've to add?

madwifi_a Atheros Linux madwifi
http://sourceforge.net/projects/madwifi/
Capture interface: 'athX'
Capture interface: 'wifiX' (Madwifi-NG)
Madwifi drivers in 802.11a-only mode.
When using madwifi-ng, be sure all non-monitor VAPs have
been removed, otherwise madwifi will not properly report
most traffic.

madwifi_b Atheros Linux madwifi
http://sourceforge.net/projects/madwifi/
Capture interface: 'athX'
Capture interface: 'wifiX' (Madwifi-NG)
Madwifi drivers in 802.11b-only mode.
When using madwifi-ng, be sure all non-monitor VAPs have
been removed, otherwise madwifi will not properly report
most traffic.

madwifi_g Atheros Linux madwifi
http://sourceforge.net/projects/madwifi/
Capture interface: 'athX'
Capture interface: 'wifiX' (Madwifi-NG)
Madwifi drivers in 802.11g-only mode. This will,
obviously, also see 11b networks.
When using madwifi-ng, be sure all non-monitor VAPs have
been removed, otherwise madwifi will not properly report
most traffic.

madwifi_ab Atheros Linux madwifi
http://sourceforge.net/projects/madwifi/
Capture interface: 'athX'
Capture interface: 'wifiX' (Madwifi-NG)
Madwifi drivers in 802.11a and 802.11b combo mode. This
will seamlessly switch between bands during channel
hopping.
When using madwifi-ng, be sure all non-monitor VAPs have
been removed, otherwise madwifi will not properly report
most traffic.

madwifi_ag Atheros Linux madwifi
http://sourceforge.net/projects/madwifi/
Capture interface: 'athX'
Capture interface: 'wifiX' (Madwifi-NG)
Madwifi drivers in 802.11a and 802.11g combo mode. This
will seamlessly switch between bands during channel
hopping.
When using madwifi-ng, be sure all non-monitor VAPs have
been removed, otherwise madwifi will not properly report
most traffic.


I used madwifi_ag and i've ath0 as interface:

Capture interface: 'athX'


So what's the problem??

Thanks


Reply to this message