Kismet Wireless

Kismet Forums

 

Posted by:JackTheVendicator
Subject:Kismet on BCM6438-based router with BCM4318 wlan... possible?
Date:17:22:46 04/02/2007

I have a bcm6438 router with a bcm4318 wlan interface... reading output from wlctl, it seems to have RFMON:

# wlctl
...
monitor set monitor mode
0 - disable
1 - enable active monitor mode (interface still operates)
...

Could it be used with Kismet?
Thanks in advance.

Here are some board info:
# cat /proc/cpuinfo
system type : MAGIC
processor : 0
cpu model : BCM6348 V0.7
BogoMIPS : 254.77
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
VCED exceptions : not available
VCEI exceptions : not available

# cat /proc/modules
wl 521488 0 - Live 0xc0120000
tls_smc 26272 0 - Live 0xc0015000
bcm_usb 16768 0 - Live 0xc002d000
bcm_enet 38256 0 - Live 0xc003f000
bcmprocfs 12896 0 - Live 0xc0010000
adsldd 119568 0 - Live 0xc0056000
blaa_dd 6752 0 - Live 0xc000d000
atmapi 50512 2 adsldd,blaa_dd, Live 0xc001f000

# cat /proc/interrupts
CPU0
4: 0 MIPS brcm_4
7: 273247 MIPS timer
10: 0 MIPS brcm_10
12: 2894 MIPS brcm_12
13: 0 MIPS brcm_13
14: 1 MIPS brcm_14
17: 0 MIPS brcm_17
22: 0 MIPS brcm_22
24: 0 MIPS brcm_24
28: 3620 MIPS brcm_28
30: 0 MIPS brcm_30
32: 13219 MIPS brcm_32
33: 0 MIPS brcm_33

ERR: 0

# cat /proc/iomem
00000000-00f9ffff : System RAM
00010000-0015c1eb : Kernel code
0015c1ec-001900bf : Kernel data
08000000-08ffffff : bcm96348 pci memory space
08000000-0800ffff : 0000:00:01.0

# cat /proc/ioports
0c000000-0c00ffff : bcm96348 pci IO space

# cat /proc/bus/pci/devices
0008 14e44318 20 08000000 00000000 00000000 00000000 00000000 00000000 00000000 00010000 00000000 00000000 00000000 00000000 00000000 00000000 wl

# cat /proc/net/wireless
Inter-| sta-| Quality | Discarded packets | Missed | WE
face | tus | link level noise | nwid crypt frag retry misc | beacon | 16

# cat /proc/net/wl0
wl0: Nov 15 2005 12:49:19 version 3.131.35.0.cpe0.0

resets 1
perm_etheraddr 00:03:6f:92:33:83 cur_etheraddr 00:03:6f:92:33:83
board 0x449, board rev 4.1
rate_override: A 0, B 0
antdiv_override 3 txant 3

BSS Config 0: "JackTheVendicator"
enable 1 up 1 wlif 0x00000000 "wl0"
wsec 0x0 auth 0 wsec_index -1 wep_algo 0

BSS Config 1: "Guest"
enable 0 up 0 wlif 0x80a7e800 "wl0.1"
wsec 0x0 auth 0 wsec_index -1 wep_algo 0
current_bss.BSSID 00:03:6f:92:33:83
current_bss.SSID ""
associated 1
wl_get_stats() 0 0 1
wl_ioctl() 0 0 1
_wl_add_if() 0 0 1
wl_timer() 0 1 0
wl_open() 0 0 1
wl_set_multicast_list() 0 1 0
wl_isr() 1 0 0
wl_dpc() 0 1 0
wl_start() 0 1 0


Reply to this message