|Subject:||Kismet-newcore on Asus Eee PC 900HA|
> > Card is fully supported. Exact error text would be useful.
> > -m
> I made sure that I'm running the latest version of kismet-newcore.
> the console errors go as follows
> ERROR: Failed to find a type for auto-type source wlan1, you will have to tell kismet what it is by adding a type=[card type] to the ncsource config
> ERROR: it is possible that the device for interface wlan1 is not active or was not plugged in. Kismet will ignore this interface, you may want to re-add it later
> ERROR: Failed Kismet client command: ADDSOURCE command failed
> the card is obviously plugged in because I'm getting wireless connection
Then it isn't wlan1 or isn't using any modern driver with the mac80211 layer, or doesn't create any of the standard madwifi-ng VAP structure.
In any case, that means your driver install is very broken or the interface isn't correct.
wlan1 isn't the normal/proper name for a madwifi-based card, which implies mac80211, however the autodetect for the mac80211 drivers will default to a generic control if the driver name isn't known, so it's not even finding the mac80211 structures in /sys
Reply to this message