| Posted by: | integrin |
| Subject: | Kismet drone client failed to find the sentinel value in a packet header, dropping connection. |
| Date: | 11:09:14 19/12/2005 |
> There is a wrt54 openwrt source now (wrt54prism), and the drone protocol is "mostly done".
>
> From intel I'm able to control channel hopping on the drone on a wrt.
>
> If you want to give it a shot, the code is all in newcore svn.
>
> -m
so i haven't changed the drone version on my wrt (2005.08.R1) yet; i couldn't find the switches needed to compile a small build.
i should note that when i run the server on the wrt directly i have no problem logging in from OS X with the corresponding (2005.08.R1) kismet client.
i did compile and install newcore (Build 1656, i believe). i started the drone on the wrt with source 'wrt54g,eth1,wrt54g' and then the newcore server with source 'drone,tcp://192.168.1.2:3501,drone'. the interesting thing is that the 'version mismatch' error seems to be gone. here's a partial console dump:
INFO: Source 0 (addme): Opening drone source interface tcp://192.168.1.2:3501...
INFO: TcpClient connected to 192.168.1.2:3501
INFO: Source 0 (addme): Opened source. UUID:
b5b3ad5c-707c-11da-a70d-16a20413408b
INFO: Inserting basic packet dissectors...
INFO: Allowing Kismet frontends to view WEP keys
INFO: Starting GPSD client...
INFO: Enabling reconnection to the GPSD server if the link is lost
ERROR: TCP client connect() failed: Connection refused
ERROR: Could not create initial connection to the GPSD server
INFO: Using GPSD server on localhost:2947
INFO: Creating network tracker...
INFO: Probe network tracking disabled by config file
ERROR: Netracker failed to read SSID cache file version, cache file will be
replaced
ERROR: Netracker failed to read IP cache file version, cache file will be
replaced
INFO: Registering dumpfiles...
INFO: Log file type 'pcapdump' activated.
INFO: Opened pcapdump log file 'Kismet-Dec-19-2005-9.pcapdump'
INFO: Log file type 'netxml' activated.
INFO: Opened netxml log file 'Kismet-Dec-19-2005-9.netxml'
INFO: Log file type 'nettxt' activated.
INFO: Opened nettxt log file 'Kismet-Dec-19-2005-9.nettxt'
INFO: Log file type 'gpsxml' activated.
INFO: Opened gpsxml log file 'Kismet-Dec-19-2005-9.gpsxml'
INFO: Log file type 'netxml' activated.
INFO: Kismet starting to gather packets
ERROR: Kismet drone client failed to find the sentinel value in a packet
header, dropping connection. Will attempt to reconnect in 5 seconds
ERROR: TCP client connect() failed: Connection refused
The drone responds with:
Accepted streamer connection from 192.168.1.105
WARNING: Killing client fd 6 read error 22: Invalid argument
This cycle continues every 5 seconds (auto reconnect enabled).
Does any of this help you? Let me know if you need me to try anything else.
thx
Reply to this message