| Posted by: | integrin |
|---|
| Subject: | FATAL: version mismatch: Drone sending version 222, expected 9. |
|---|
| Date: | 12:28:08 30/11/2005 |
|---|
kismet is compiled and installed on OS X (there's no viha driver involved because i'm using my WRT in bridge mode):
<--------------------------------->
Server options: none
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
NOTICE: Disabling channel hopping, no enabled sources are able to change channel.
Source 0 (drone): Opening kismet_drone source interface 192.168.1.2:3501...
Allowing clients to fetch WEP keys.
Logging networks to Kismet-Nov-30-2005-10.network
Logging networks in CSV format to Kismet-Nov-30-2005-10.csv
Logging networks in XML format to Kismet-Nov-30-2005-10.xml
Logging cryptographically weak packets to Kismet-Nov-30-2005-10.weak
Logging cisco product information to Kismet-Nov-30-2005-10.cisco
Logging gps coordinates to Kismet-Nov-30-2005-10.gps
Logging data to Kismet-Nov-30-2005-10.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Tracking probe responses and associating probe networks.
Reading AP manufacturer data and defaults from /usr/local/etc/ap_manuf
Reading client manufacturer data and defaults from /usr/local/etc/client_manuf
Using network-classifier based data encryption detection
Dump file format: wiretap (local code) dump
Crypt file format: airsnort (weak packet) dump
Kismet 2005.08.R1 (Kismet)
Logging data networks CSV XML weak cisco gps
GPSD cannot connect: Connection refused
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Registering builtin client/server protocols...
Registering requested alerts...
Registering builtin timer events...
Gathering packets...
FATAL: version mismatch: Drone sending version 222, expected 9.
<--------------------------------->
kismet drone is installed on my WRT running OpenWRT. It starts up fine:
<--------------------------------->
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Disabling channel splitting.
Source 0 (wrt54g): Enabling monitor mode for wrt54g source interface eth1 channel 0...
Source 0 (wrt54g): Opening wrt54g source interface eth1...
NOTICE: bind address not specified, using INADDR_ANY.
Kismet Drone 2005.08.R1 (Kismet)
Listening on port 3501 (protocol 9).
Allowing connections from 192.168.1.0/255.255.255.0
Accepted streamer connection from 192.168.1.133
WARNING: Killing client fd 6 read error 22: Invalid argument
<--------------------------------->
any ideas? hopefully i'm missing something simple. feel like i'm sooo close to having this working.
Reply to this message
